Our solutions for

Woodworking

R. E. Morrison is the Canadian source for vacuum pumps, parts and service. Oil free rotary vane carbon vane technology is the leading technology used in the vacuum hold down on CNC router tables.

R. E. Morrison provides factory overhauls with a 1 year factory equipment warranty. Why replace your old pumps when they can be rebuilt as new for a fraction of the cost.

Because rotary vane technology leads the industry and there are thousands of pumps in Canada, and pumps break down and need parts. OEM parts can be extremely costly and cheap aftermarket parts can leave you broken down sooner than expected. That's why we have sourced the best but Be careful to os. Becker vanes last on average 8,000 hours that means 8000 trouble free productive hours.

The Republic high quality cost effective regenerative vacuum pump is the ideal choice when high flow is required such as textile and sign making or glass etching.

R. E. Morrison has in stock in Mississauga all the you will need to keep your CNC vacuum running trouble free.

Let's Get Started
SEE IT IN ACTION
We are proud to work 
with these companies

Applications

Dust & Scrap Removal

Sawmill chips and dust are inevitable as wood is cut, sawed, drilled, and formed. Republic’s Regenerative Blowers use vacuum to remove such by-products into a collection bin reducing the amount of dust and chips in the air.

USED FOR:
Particle Removal
Request Quote

Wood Drying

Vacuum drying is often the best option for chemical process industries (CPI) and other products that are sensitive to heat. Vacuum is used to lower the pressure, thus lowing the boiling point of water. This causes evaporation to happen much faster, and therefore the product dries quickly and without the direct application of heat. This process is especially good for porous materials such as wood, paper, pulp, and textiles. REM Equipment offers solutions for wood drying using the Republic Claw Pumps.

USED FOR:
Request Quote

Wood Vacuum Holding & Lifting

Many automated processes and CNC machines utilize vacuum throughout the production line. Vacuum is used to lift and move wood through a suction device and is held in place during the routing process gripped by vacuum, often held on the CNC table. Stable and consistent vacuum levels are necessary to ensure the secure clamping of wood. REM Equipment offers a diverse selection of solutions for vacuum holding and lifting including claw pumps, dry rotary vane pumps, regenerative blowers, and centrifugal blowers.

USED FOR:
Vacuum holding for CNC
Lifting & Moving Material
Request Quote

Let’s Get Started

Fill out the form below and one of our dedicated team will get back to you shortly.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Air Knife Drying for Craft Brewing

Our Adamark product line is the leader in craft can and bottle drying in the Canadian market. Our decades of experience have led us to develop a product range that fits any size brewery. We are really excited to be launching new systems engineered specifically for craft brewing. They offer high performance at reasonable prices. We understand the craft brewing industry is booming so ask us about our upgrade program so your drying can scale as you do.

Reduced Rejects

Instant reduction in unit and case rejects.

Better labeling

Immediately improve paper/shrink wrapped labels and ink jet code quality.

Prevents Case Rot

Guaranteed increase in case strength and case longevity.

Pro Performance

Powerful enough for the most demanding can and bottling environments.

Expert Service

Over 35 years of can and bottle drying service and experience.

Capture Rinse Water

Capture more rinse water for sustainable water recycling

Saves Energy

Our blowers use a fraction of the energy vs. compressor based drying systems.

Mold Prevention

Reduce the likelihood of mold formation on can lids and under bottle caps.

Adamark is USED BY THE BEST

Systems For All Sizes

With the widest range of custom and turnkey drying solutions on the market, there is an Adamark system thats right for you.

BASIC

up to
100
cans per minute
3.3 hp
3 Air Knives
Designed to be installed on 3 feet of conveyor after automated filler and before labeler
Get A Quote

Plus

up to
200
cans per minute
Most Popular
5 hp
4 Air Knives
Designed to be installed on 4 feet of conveyor after automated filler and before labeler
Compact VFD to allow for blower performance enhancement
Get A Quote

Advanced

up to
400
cans per minute
10 hp
6 Air Knives
Designed to be installed on 4-6 feet of conveyor after automated filler and before labeler
Compact VFD to allow for blower performance enhancement
Get A Quote

PRO

600
plus
cans per minute
20 hp
6+ Air Knives
Designed to be installed on 6 feet of conveyor after automated filler and before labeler
Compact VFD to allow for blower performance enhancement
Get A Quote
"We have had nothing but great service and real initiative to help us make our packaging line a more efficient and reliable process. I would choose Adamark again for can drying."
Sarah Casorso
Head Brewer at Brench Brewing Company

The all-New Adamark UV Sanitizer

A New Level of Clean

Feel confident the tops of your cans are absolutely clean and mold-free. It kills 99.9% of waterborne bacteria and organic matter so you can feel confident the tops of your cans and bottles are absolutely clean.

We use a Sanuvox™ commercial grade UV light to create the ultimate in can sanitation. The Adamark™ UV Sanitizer is available in 12”, 24”, 30” and 40” lengths and single or double light configurations depending on the line speed.
Get a Quote Today

Let’s Get Started

Fill out the form below and one of our dedicated team will get back to you shortly.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.